Skip to main content
F3D
Mặt nạ công tắc Decorator phong cách Mid-Century Modern 1

5 images

Đồ Gia Dụng

Mặt nạ công tắc Decorator phong cách Mid-Century Modern

By DergBear_1688263

Downloads
3
Likes
3
Views
78

Files 10 3.9 MB

  • Mid-Century_Wallplate_1_Gang_1782411307.3mf3MF · 134.3 KB
  • Mid-Century_Wallplate_2_Gang_1782411308.3mf3MF · 155.7 KB
  • Mid-Century_Wallplate_3_Gang_1782411309.3mf3MF · 165.5 KB
  • Mid-Century_Wallplate_4_Gang_1782411310.3mf3MF · 177.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a trapezoid shaped wallplate for North American decorator switches/outlets. It feels fairly mid-century and is a fun addition to a house or room. The rounded edges struggle as overhangs, so I recommend printing it face-up with supports for the whole underside. It does use more filament but as a primarily cosmetic design, I think it's worth the extra filament.

NOTE: Normally the screws come with the wall plate, so you can either reuse old ones or buy them separately from Hillman or Eaton.

  • Printed with PETG at 0.15mm

    • PLA will likely work too but be more likely to crack
  • Printed face up with supports Everywhere

    • Snug style

    • 0.2 Top Contact Z Distance

      • Increase if the supports are too difficult to remove.
    • 3 Top Interface Layers

Installation

  1. Shut off power AT THE BREAKER and use a non-contact voltage tester to confirm the power is not flowing in or around the switches/outlets you are working on.

  2. Remove the screws holding the old wallplate to the wall

  3. Pull off the old wallplate. It may stick to the paint if it's been there a while, so a gentle pry may be necessary

  4. Install the new bracket using either the original screws or a new set of screws. DO NOT over-tighten. The screws will probably not go in as tightly, since it will warp more than traditional Polycarbonate plates.

  5. Turn the breaker back on.

Read more Show less

Print spec

Formats
3mfbgcode
Model files
10
Total size
3.9 MB
Largest file
819.1 KB

0 comments

See all