
Móng Vuốt Động Vật (Animal Claw) - Phụ kiện thủ công
- Downloads
- 3
- Likes
- 1
- Views
- 33
- Remixes
- 0
- Comments
- 0
Files 6 1.4 MB
- Claw_12mm_x_8_1782337608.3mf3MF · 186.8 KB
- Claw_34mm_1782337609.3mf3MF · 136.8 KB
- Claw_15mm_x_12_1782337610.3mf3MF · 172.5 KB
- Claw_12mm_1782337611.stlSTL · 330.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #403416
- Category
- Mỹ Thuật
- Published
- Tags
Description
DESCRIPTION
3D printing is wonderful when it comes to parts for craft work. My wife wanted claws for her crochet
gargoyle character. Here is my 3D design part printed claw.
To give it that earthy look, the claw was coloured in red clay using acrylic paint. The claw is attached to the gargoyle character by stitching around the recessed claw base. Alternatively, the claw can be glued.
CLAW DIMENSIONS
Depending on your modelling needs, the claw can be scaled to your required size in the slicer software.
I supply the claw in its original size of 34mm high and scaled to 12 and 15mm high.
THANK YOU
I hope that you can find this print useful, too. If so, you can support my work by buying me a coffee …
Remember to leave a comment, perhaps a like to keep me enthused to make more. I have a 100+ published designs. Do check them out.
I upload my 3D print designs first on ...
https://makerworld.com/en/@Wiseone
I have a 100+ published designs. Do check them out. You can follow me there, too.
PRINTING INFORMATION
My print is made in 1.75mm Bambu Lab PLA Tough+ Silver, with 0.08mm layer height on a Bambu Lab H2D printer.
The parts are small, so a brim was used. To improve print detail, I used a 0.2mm print head, too.
Presented in 12mm claw x 8 parts, 15mm x 12 parts and 34mm single part.
Both the print profiles and the individual STL files are included for download.
Print spec
- Formats
- 3mfstl
- Model files
- 6
- Total size
- 1.4 MB
- Largest file
- 330.1 KB
0 comments
You may also like 12 models
See all-
New -

-

-
New -

-

-
New -

-

-

-

-


