Skip to main content
F3D
Giá đỡ ZWO EAF cho kính thiên văn William Optics RedCat 71 1

4 images

Giáo Dục

Giá đỡ ZWO EAF cho kính thiên văn William Optics RedCat 71

By Jannis483

Downloads
52
Likes
7
Views
561

Files 4 139.1 KB

  • Spacer_1766190490.3mf3MF · 21.5 KB
  • Adapterplatte_EAF_1766190491.3mf3MF · 34.6 KB
  • Klemmring_schraube_1766190491.3mf3MF · 41.6 KB
  • Klemmring_Mutter_1766190492.3mf3MF · 41.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Deutsch:

Einfaches Montagesystem für das RedCat. Optional kann zusätzlich der Klemmring gedruckt werden, um ein Verdrehen der Taukappe und ein versehentliches Festklemmen des Helikal-Okularauszugs zu verhindern. Für den Klemmring werden zwei M3-Vierkantmuttern und zwei M3-Schrauben benötigt.

Es wird empfohlen, mit einem starken Material wie PETG CF, Extrudr GreenTec Pro, PA12CF/GF oder ähnlichem zu drucken.

  • 3 Perimeter
  • 0,2mm Layerhöhe
  • 20 % Gyroidfüllung
  • Keine Stützen erforderlich

Benötigtes Montagematerial:

  • Riemen: 6 mm GT2-348
  • GT2 Riemenpulley 16 Zähne 5mm Mittelbohrung
  • 2x M6*40mm
  • 1x M6*14mm + 1*M6 Mutter in flach (3mm dick)

English:

Simple mounting system for the RedCat. Optionally, the clamping ring can also be printed to prevent the dew cap from twisting and accidentally clamping the helical focuser. For the clamp ring you need two M3 square nuts an two M3 screws.

It's recommend to print with a strong material like PETG CF, Extrudr GreenTec Pro, PA12CG/GF or something similar.

  • 3 Perimeters
  • 0.2mm layer height
  • 20% Gyroid infill
  • No supports needed

Needed mounting materials:

  • Timing belt: 6mm GT2-348
  • GT2 belt pulley 16 teeth 5mm center bore
  • 2x M6*40mm
  • 1x M6*14mm + Flat Screwnut (3mm thick)

Read more Show less

Print spec

Formats
3mf
Model files
4
Total size
139.1 KB
Largest file
41.6 KB

0 comments

See all