Giá đỡ đồng hồ tốc độ xe đạp Sigma BC 10.0 WR

Recommended print settings

• PETG

• Nozzle: 0.4

• Layers: 0.1-0,15

• Infill: between 20-25%

• Perimeters: 3-4

• Bottom/Top Layers: 5

• SUPPORTS → YES Tree

 Place the part on the print bed as shown in the pictures.

The four blocks that can be seen in the slicer image above the holes at the corners are "support blockers". This is because no supports are needed for the small holes.

The cross-sectional image shows that the cable ties can be pushed through.

Like the design?

Please leave a “like” …. ❤ …..
Feel free to follow me …. ✅ …..
I am glad about every make and a nice review!