
Lazy Kate - Dụng cụ hỗ trợ xoay len cho EEW Nano
- Downloads
- 1
- Likes
- 1
- Views
- 36
- Remixes
- 0
- Comments
- 0
Files 10 40 MB
- Lazy_Kate_-_non-tension_Foot_1781201234.stlSTL · 3.1 MB
- Lazy_Kate_-_Arch_Part_1_1781201235.stlSTL · 6.8 MB
- Lazy_Kate_-_Arch_1781201237.stlSTL · 9.4 MB
- Lazy_Kate_-_tension_peg_Print2_1781201239.stlSTL · 2.9 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #401522
- Category
- Mỹ Thuật
- Published
Description
Summary
A 4-bobbin Lazy Kate specifically designed for the EEW Nano bobbins.
with options for solid arches, pieced arches for smaller print beds, tension or non-tension feet.
Prints without supports
Print the feet upside down (pins down), bobbin pegs upright with the pin end down, and the 4 (2) arch pieces with the 1.5mm filet down (Smaller of the filets, top filet is 5mm)
*Print pegs on their flat end and use with care, or print on the side with supports and sand to smooth after print.
Print:
4 bobbin pegs
2 feet (two non tension, - OR - 1 of each right and left tension)
2 each of arch parts 1 and 2 - OR - two whole arches
2 tension pegs if using tension
Don't glue the pegs! The pegs come in and out for adding bobbins. You can CA the feet to the arch or keep everything modular for storage/travel. CA the arch parts together.
*If the bobbin pegs are too snug (they should just slide in and not get stuck in the arches) I’ve found it’s easier to file a bit off the pegs than try to file down the arch holes.
Time of publication: Tension version not tested. PRINT TENSION PINS on their sides with support for strength or they'll snap under stress.
EDIT: user has posted that on a different printer than my Ender 3 Pro, printing the bobbin pegs at 105% allows the pegs to fit snugly and still be removed easily.
Print Settings
-
Printer brand:
Creality
-
Printer:
Ender 3 Pro
-
Rafts:
No
-
Supports:
No
-
Resolution:
0.2
-
Infill:
15%
-
Filament brand:
TTY3D
-
Filament color:
multi silk
-
Filament material:
PLA
Print spec
- Formats
- stltxt
- Model files
- 10
- Total size
- 40 MB
- Largest file
- 9.4 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -

-

-

-
New -
New -
New

