Ốp che thanh đỡ trục X cho Kobra X

I don't know about you, but I really like the sleek, polished look of the Kobra X, but those little aluminum bars that hold up the X-Axis, with an empty screw hole, felt a little bare to me. So I got out my calipers and took some measurements and this is the result. I made three different designs, one is blank, one has the 'X' logo from 'Kobra X,' and the last one has the any cubic logo. All of these are printed in the first few layers so there is not a lot of flushing to do. The Anycubic logo can be printed in three colours, the objects are labeled appropriately. They do require a bit of supports for the screw hole counter bore. Once you print them and remove the support, you can just line up the studs with the existing holes in the struts and drop them in. Then you can screw them down so they don't rattle, using the screw that you removed when unboxing your printer or any little M3 screw should work.