Tranh in 3D hoa Cúc Zinnia (HueForge)

Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm.

Swap procedure: Initial filament: Black
Switch to the next filament at layer #7 (0.64mm): Green
Switch to the next filament at layer #9 (0.8mm): Yellow
Switch to the next filament at layer #14 (1.2mm): Magenta
Switch to the next filament at layer #20 (1.68mm): Glossy White (use until the final layer)