Mẫu Poster Mastodon HueForge

This is a seven color HueForge of a Mastodon gig poster. 

Here's the color swap instructions. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Turn on Arachne and turn off purge tower. 

This print uses 7 unique filaments and is 154x220mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm

The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.64mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2

#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4

#482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1

#e6dddb PLA PolyTerra Cotton White Transmission Distance: 2.5

#de1619 PLA PolyTerra Lava Red Transmission Distance: 1

#d5c2a0 PLA+ IIID Max Tan Transmission Distance: 4

Swap Instructions:

Start with BambuLab Basic Black

At layer #11 (0.96mm) swap to BambuLab Basic Cobalt Blue

At layer #14 (1.2mm) swap to BambuLab Basic Turquoise

At layer #15 (1.28mm) swap to BambuLab Basic Indigo Purple

At layer #20 (1.68mm) swap to PolyTerra Cotton White

At layer #21 (1.76mm) swap to PolyTerra Lava Red

At layer #26 (2.16mm) swap to IIID Max Tan for the rest.