Chốt Cửa Tủ Lạnh Dometic

This model is designed as a direct replacement for the latch on older Dometic RV refrigerators. Fitment is pretty precise, some filing or tuning may be required on less dimensionally stable printers. Print the part on its side for best results.

Filament: ASA or PETG is preferred, ABS is also acceptable. PLA is not advisable.

Supports: Enabled (Tree)

Brim: Recommended for ASA and ABS

Layer Height: ≤ 0.2mm

Test-printed and designed on QIDI Q2 with PETG @ 0.16mm.