Skip to main content
F3D
Giá đỡ màn hình XENEON Edge cho vỏ case FRAME 4000D 1

4 images

Dụng Cụ Tiện Ích

Giá đỡ màn hình XENEON Edge cho vỏ case FRAME 4000D

By Corsair

Downloads
3
Views
72

Files 5 2.4 MB

  • xeneon_edge_front_mount_-_Main_part_B_1780731529.stlSTL · 1.3 MB
  • xeneon_edge_front_mount_-_Main_part_A_1780731530.stlSTL · 1 MB
  • xeneon_edge_front_mount_-_inner_support_1780731530.stlSTL · 14.3 KB
  • xeneon_edge_front_mount_-_internal_cover_B_1780731531.stlSTL · 28.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Files and how many of each you will need to print:

  • 1x Xeneon edge front mount - Main part A

  • 1x Xeneon edge front mount - Main part B

  • 2x Xeneon edge front mount - inner support

Optional

  • 2x Xeneon edge front mount - internal cover A

  • 2x Xeneon edge front mount - internal cover B

The optional parts are to cover the small gabs left on each side of the infiniral so you cannot see into the case from the front, and air/dust will not be able to get in and out since we are removing the dust filter.

Hardware needed:

  • 8x M5 bolts (Any length between 12 and 16mm will work)

  • 8x M5 Nuts (To mount to the infinirails)

  • 10x M5 Nuts (If you want to use the magnets in the xeneon edge to attach to the mount instead of screws)

  • Glue (optional)

Orient the parts as shown above, and add a support enforcer to only the underside of the large parts - the rest of the parts requires no support.

Read more Show less

Print spec

Formats
stl
Model files
5
Total size
2.4 MB
Largest file
1.3 MB

0 comments

See all