
Giá để tua vít để bàn dễ lấy — Parametric, không cần support
- Downloads
- 345
- Likes
- 66
- Views
- 1,930
- Remixes
- 0
- Comments
- 0
Files 11 24.4 MB
- screwdriverholder-v1_1780728291.fcstdFCSTD · 3.4 MB
- screwdriverholder-Hex-v1_1780728293.stlSTL · 1.2 MB
- screwdriverholder-Torx-v1_1780728294.stlSTL · 1.3 MB
- screwdriverholder-Flat-v1_1780728295.stlSTL · 1.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #398674
- Category
- DIY
- Published
Description
An ergonomic desktop screwdriver holder: full cylinder guides (not just two holes) mean bits slide back in cleanly every time. The angled orientation gives comfortable one-handed access, and the exact tip diameters ensure you naturally reach for — and return — the right driver every time.
The recessed front icon becomes sharp and readable with a single pass of a Sharpie or Edding marker.
Key features:
-
7 screwdrivers per section; link as many sections as you need (two M4× 10–20mm grub screws per joint)
-
Designed from scratch to print without supports
-
Readable front icon — color it with any marker
-
Fully parametric: set shaft diameter and choose the front label in FreeCAD
-
Fits any driver with a 1–5 mm shaft
-
Default dimensions match the Wera Micro Big Pack
-
Side caps for a clean look, secured with two M4 countersunk screws. Mirror in your slicer to get both sides.
v2 is a complete remodel in FreeCAD 1.1 with improved tolerances, better printability, and larger icons compared to v1.
FreeCAD is completely free — no paid software needed. All dimensions live in a spreadsheet. To change the front icon, click the body, open the Properties tab, and select your icon from the dropdown — the model reloads instantly.
Free to use and remix. If it earns a place on your desk, a coffee is always appreciated.
https://ko-fi.com/tiptuff
Print spec
- Formats
- fcstdstl
- Model files
- 11
- Total size
- 24.4 MB
- Largest file
- 6.1 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-
New -

-


