Hệ thống Ngăn kéo Module | Khóa nhấn Push-Push

Modular Drawer System features a satisfying push-push mechanism that allows the drawer to be opened and closed with a simple press. Combined with a fully modular design, you can stack and connect modules to create the perfect storage solution for screws, nuts, electronic components, magnets, springs, and other small parts. 🚀

• Push-Push locking mechanism 🔒

• Fully modular system

  • Modules can be stacked vertically or connected from the side

  • Snap-fit connection system keeps all modules securely connected

• Perfect for storing screws, nuts, bolts, magnets, springs, and other small parts 🛠

• Internal drawer size: 87 × 46 × 15 mm 📏

• Support-free printing

• Separate drawer front for the best possible visible surface quality

• Screw-mounted pin for quick and easy replacement if damaged 🔩

• No glue required – all parts are fully printable and designed to snap and fit together

• The mechanism requires only two rubber bands ⚠:

  • 1× 1.4 × 16 mm rubber band (pin preload)

  • 1× 1.4 × 40 mm rubber band (drawer opening and closing mechanism)

• Video Here

Printing Notes

• ⚠ The box must always be printed vertically, exactly as shown in the print profile and preview images.

• ⚠ The pin seam position is very important. Never place the seam on the flexible section of the pin, as this may significantly reduce its durability and functionality.

• ⚠ The drawer body and front panel are printed separately to achieve the highest possible front surface quality.