Móc Treo Tàng Hình PrintInPlace

Super easy to print invisible hook as PrintInPlace model.

Almost invisible hook if you look at it from the right angle:

The hook folds down 90° if you bend the middle part down:

Super simple print with no additional mounting at all because this is a print in place model.

Test your printer with this too. The Prusa Core One + handles this model with ease. =)

Because of the PrintInPlace function the hook does not require any assembly:

2 screw holders for screws up to Ø11mm head and 5mm body size can be used to mount the hook to your wall. The back also contains a hint to the measurements of 24mm of clearance between the screws:

Hardware needed

• 2x Ø6mm x 3mm round magnet 

Printing instructions

• Import the 2 parts together with the provided .3mf file and answer to keep them together with YES.

• Speed profile 0.2 used

• Textured sheet used

• Organic support from the print bed used for he holes in the back

• Gyroid supports used

• 3 perimeter walls used for more stability 

• Avoid crossing perimeters used

• Classic perimeter generator used

• Fill gaps used

• Optional: Fuzzy skin active

• Optional: Sequential output of print files active

See pictures below for details:

Happy printing =)