Mô hình Tàu chiến Star Wars Omicron-class Attack Shuttle

The Marauder was a modified Omicron-Class Attack Shuttle used by Clone Force 99 aka The Bad Batch. It appeared in the final season of The Clone Wars and most of The Bad Batch. (There were some changes between Clone Wars and Bad Batch. This model is based off of Bad Batch.)

Its design is similar to other classic shuttles, being closest to the Theta-class T-2c shuttle. It also uses some parts fromt the Nu-class, namely the shape of the body and some bits between the body and the cockpit.

This model has moving print-in-place wings.

It has a hole compatible with big pin and base (link). You will need two pins.

Dimensions

The model is at 1:270 scale.

Length

Width

Height

Flying

112mm

138mm

70.9mm

Landed

112mm

39.6mm

63.4mm

Print Instructions

Printed at 0.15mm layer height.

Requires supports on buildplate.

Add "omicron shuttle-support blocker" as a support blocker to "omicron shuttle-main".

The top wing is printed separately.

You can print "omicron shuttle-wing test" to test if the hinges work with your printer and settings.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#