Kệ Nhỏ Decor (A Little Shelf)

There are two versions available:
-2x keyhole-style mounting faces. Fits screws up to 4.6mm thread width screw, 8.75mm head diameter, 3.4mm head height (That's about a #8 in US screw sizes). The space between mounting holes is 68mm on-center.
OR
-Solid mounting faces if you prefer double-sided hanging tape. You'll probably have to cut to size, I didn't design this with common tape dimensions in mind. Mounting surfaces are 12mm wide by 23mm tall.

Prints as-is, face-down, with no supports. You can use the bed texture or bottom fill patterns to make the shelf surface more interesting. I like a textured plate with concentric bottom fill. :)
Or, you can print it with mounting surfaces facing the bed. It shouldn't need supports, but there is one overhang on the shelf's underside that may lose quality. 

Not certified for use with heavy items. Display your solid lead statues at your own risk.