Skip to main content
F3D
Khung gắn tấm tiêu âm cho Prusa Enclosure 1

2 images

Máy In 3D

Khung gắn tấm tiêu âm cho Prusa Enclosure

By MarkoZele_603207

Downloads
2
Likes
6
Views
126

Files 2 280.1 KB

  • Prusa_panel_mount_1780668571.3mf3MF · 57 KB
  • Prusa_panel_mount_1780668572.stlSTL · 223.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

DE:

Benötigte Materialien: 

  • M3x10 Schrauben (mindestens 60)

  • Montage Kleber / genügend starker Kleber

  • Akkustikpaneele 

  • Werkzeige (Cuttermesser, elektrischer Schraubendreher, Säge, Geduld ;))

Schritte:

  1. Akkustikpanele zuschneiden mit Säge falls nötig

  2. Rahmen 4X drucken (PLA oder PETG mit 15% Infill ausreichend)

  3. Rahmen mit M3x10 Schrauben befestigen (ACHTUNG: SCHRAUBEN NACH MONTAGEKLEBER NICHT MEHR ERREICHBAR!!!!!!!!!!)

  4. 3D-Drucker ausbauen und auf die Seite legen (wenn nötig, empfohlen bei lang trocknenden Montagekleber)

  5. Panele mit Kleber ankleben auf den 3D-gedruckten Rahmen

  6. Trocknen lassen (Montagekleber 24h)

Vorteile:

  • Wärmedämmung (ein müh besserer Druck bei kritischen Materialien)

  • Deko

  • Halterung für z.B. ein kleines Regal

EN:

Required Materials:

  • M3x10 screws (at least 60)

  • Construction adhesive / sufficiently strong glue

  • Acoustic panels

  • Tools (utility knife, electric screwdriver, saw, patience ;))

Steps:

  1. Cut the acoustic panels to size with a saw if necessary

  2. Print the frame 4X (PLA or PETG with 15% infill is sufficient)

  3. Secure the frame using M3x10 screws (WARNING: THE SCREWS WILL NO LONGER BE ACCESSIBLE AFTER THE PANELS ARE GLUED ON!!!!!!!!!!)

  4. Remove the 3D printer and place it on its side (if necessary; recommended when using construction adhesive with a long curing time)

  5. Glue the panels onto the 3D-printed frame

  6. Allow everything to dry (construction adhesive: approximately 24 hours)

Advantages:

  • Thermal insulation (slightly improved print quality with temperature-sensitive materials)

  • Decorative appearance

  • Mounting surface for accessories such as a small shelf

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
280.1 KB
Largest file
223.1 KB

0 comments

See all