Mô hình Cá sấu nước mặn (Saltwater Crocodile)

An original model of an Australian saltwater crocodile found in the northern regions of the continent.

I printed this model using an Elegoo Saturn 3 ultra resin printer.

I used a ABS-like white resin with 15% Siraya Tenacious. 

Elegoo SatelLite Slicer was used.

5 Base layers for 30 sec exposure

8 transitional layers

2.6 sec exposure for the rest. 

55 / 90 mm/s  and 65 / 90 mm/s lift speeds

90 / 55 mm/s  and 90 / 65 mm/s retract speed with 1 sec after retract pause. 

6 min wash with IPA and  2 min UV cure.

Model was printed at a 30 degree angle and with supports.  It failed when printed flat.