Mèo Thiên Thần - Remix cho in FDM

Update: As requested, I've added an Angel Cat solid with Ring to the files.

Update: My skills with Meshmixer are getting better. Decided to revisit this remix and post a version with the hollow filled in. Added the file "angel_cat_Solid.stl" which is not hollow and is oriented in the best way I found to print this model with FDM.

I have an adopted cat whose name is Angel. When I saw the design, I had to print it. That's how this remix of a remix happened.

This is a beautiful piece remixed by corpusdemonicum and published as Angel Cat. The original remix is printed on an Anycubic photon dlp printer. I remixed the remix by closing the holes and setting an orientation to print on my HyperCube Evolution.

Update: Added "angel_cat_Remix3.stl" which adds a ring to the design so it can to be hung as an ornament.

Print Settings

Printer:

HyperCube Evolution

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

None or 100% (See text)

Filament:

3D Solutech PLA

White

Notes:

The stl file is oriented to the best printing solution I found.

My slicer settings for hollow version were:

• Wall thickness 1.2mm
• Supports set to touching build plate
• Support roof enabled and Z distance at .15mm
• Overhang Angle 55 degrees
• Support Density 15%

My slicer settings for filled version were:

• Wall thickness 1.2mm
• Infill 10% Gyroid
• Supports set to touching build plate
• Overhang Angle 55 degrees
• Support Density 15%

Note

When printing the version with the ornament ring I used 100% fill to add strength to the ring and wings. The design will still print as hollow but the area between the outside and inner walls will be filled.

Category: Decor