Đón gót giày mini di động, 10cm

I made this model on Fusion 360, it works good for your house. You will have to print this shoehorn with petg, with pla you could risk to brake it. You will have to use supports to print this, print it with the longest part facing the print bed. I printed E-Sun PETG with nozzle at 250°C and the hot bed at 90°C but it works even with hot bet at 80-85°C. I reccomend you to put glue on the hot bed. I used a nozzle height of 0,16mm but it works good with 0.30mm too. With 0.3 mm of layer height it takes only 1 hour, with 0,16mm it takes 2 hours.