Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K
Máy In 3D
Ngàm gắn Sunlu E2 cho máy in Core One
Remix of Ngàm gắn Core One L cho Sunlu S4 By ThomasStokho_3652668
- Downloads
- 11
- Likes
- 1
- Views
- 214
- Remixes
- 1
- Comments
- 0
Files 1 94.4 KB
- Sunlu_E2_Mount_1780414601.stlSTL · 94.4 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
Description
Installs easily using the mounting screws from the original unit.
It does not interfere with the Core One vents, since there is about 0.75in/19mm clearance after installing. I rotated the Core One top panel 180deg/Pi rad :-) to improve ventilation in the chamber when the fans are on.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 94.4 KB
- Largest file
- 94.4 KB
0 comments
You may also like 12 models
See all-
-
CORE One/+ INDX printed parts
Byprusa-researchLikes0Downloads2.7K -
Prusa Core One – INDX Spoolholder Caps
Bypeter-van-der-waalLikes0Downloads253 -
Khay Đựng Hạt Hút Ẩm Cho Lõi Cuộn SUNLU Spool
Byarhi_585078Likes64Downloads540 -
INDX Rear Filament Sensors Holder V2
BykingnothingLikes0Downloads180 -
Cảm biến sợi nhựa CoreOne INDX với khớp nối PTFE | M5 M6 M10
ByfilamentalistLikes71Downloads109 -
Phụ kiện đinh gai 3D cho giày Crocs - Tự tay tạo phong cách cá tính
ByHanzo3dLikes155Downloads413 -
INDX Top Cover Hole Plug Grommet
Byp3rr1ff3ryLikes0Downloads147 -
Dụng cụ hỗ trợ rút trục X (X-axis Rod Puller)
ByGeek5DLikes147Downloads484 -
Dụng cụ cạo bàn in / ron (Gasket Scraper) nhỏ gọn
ByBrokentooth_designsLikes23Downloads407 -
CORE One INDX Filament Sensor Top with PTFE Couplers
ByritchiedcLikes0Downloads137 -
