
Phao Bỏ Clo Hình Rùa Cho Hồ Bơi
- Downloads
- 58
- Likes
- 28
- Views
- 362
- Remixes
- 1
- Comments
- 0
Files 8 7.7 MB
- tartaruga_piscina_supporto_petg_nuovo_1780412095.3mf3MF · 726.6 KB
- Ttartaruga_piscina_supporto_pla_nuovo_1780412096.3mf3MF · 726.6 KB
- Nuovo_dosatore_coro_1780412097.stlSTL · 1.1 MB
- Nuova_tartaruga_1780412098.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #394420
- Category
- Thể Thao & Ngoài Trời
- Published
- License
- Creative Commons — Attribution
Description
Turtle Pool Chlorine Floater 🐢
A fun and practical floating chlorine dispenser for pools, designed in the shape of a turtle.
The lower compartment is designed to hold up to 3 chlorine tablets (20g each). Once placed in the water, the floater slowly disperses chlorine while floating around the pool.
The bottom section is fully screwable/removable, making it easy to insert or replace the chlorine tablets whenever needed.
Printed entirely in PETG for improved durability, UV resistance, and better resistance to water and pool chemicals.
Important Update
Based on the feedback received from several users, I have uploaded two new print profiles that resolve many of the issues reported with the original version.
What's Changed?
-
The chlorine tablet dispenser has been enlarged to better fit standard 20 g chlorine tablets.
-
The thread has been completely redesigned and moved inside the turtle, making the model easier and more reliable to print.
-
The print settings have been reviewed and optimized.
New Print Profiles
-
PLA with PLA Supports
-
PLA with PETG Supports
Recommendation
I strongly recommend using one of the new print profiles, as many users experienced issues with the first profile I originally uploaded.
Thank you to everyone who took the time to leave feedback and suggest improvements. Your comments helped me make this model much better.
I apologize again for any inconvenience caused by the previous version.
Features
-
Holds up to 3 x 20g chlorine tablets
-
Floating turtle design
-
Screw-open bottom compartment
-
Slow chlorine dispersion
-
Easy to refill
-
PETG recommended
Print Settings
-
Material: PETG
-
Supports: Yes
-
Layer Height: 0.2 mm
-
Infill: 15–20%
-
Wall Count: 3
-
Recommended for outdoor/pool use
Print spec
- Formats
- 3mfstl
- Model files
- 8
- Total size
- 7.7 MB
- Largest file
- 1.5 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-

-



