Móc treo vườn cho trụ bê tông 110mm

Printed a no fixings hanging hook for the garden, fits a concrete post with a face width of 110mm, depth around 20mm. most suitable for ASA but other materials may do the job, 

I would suggest printing in structural 0.20, with at least 4 walls and a 3D infill. 

Edited:

Now added a split version so the clip part can be printed flat so the print strength is in the clip and the hanger part can be printed flat for best strength and 2 heat inserts added for joining. 

Edited:

Had to modify the split version as it turns out not all posts are created equal, this new clip is a loser fit. May add a wedge spacer to the files for those wanting a tighter fit. will update an edit again, once I modify the all in one version so that it has a looser fit.

Parts needed 

2 x M3 10mm hex head (might be 15mm long need to double check)

2 x M3 heat press fittings (mine are 4mm diameter x 5mm length)

Print in ASA best, minimum 4 perimeters and 4 top and bottom layers.