Mô hình Hueforge: Stranger Things Eleven

Hueforges can be resized, only change the X and Y scale, leave the Z height the same.

Stranger Things Eleven

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.4x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm

Filaments Used:
PLA Sunlu Meta Black  Transmission Distance: 1
PLA Elegoo Gray  Transmission Distance: 3.4
PLA Elegoo Red  Transmission Distance: 4
PLA+ Elego White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest or

Border Only Colors. 
At layer #23 (1.92mm) swap to Black or any color for the rest.

If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!