Đế Gridfinity cho giá úp bình nước Sodastream

I wanted to organize the bottle drying more. The drying stands move around by themselves.

I took a low profile Gridfinity base and created a 70 mm central pocket. For me this created a light but sufficient friction fit with the drying stand (69,5 mm). The holes are a result of the low profile, but also welcome as they will provide drainage if needed.

I happened to print it with 0.2 mm layer height in white Prusament PETG and it nicely fits the PETG stands as well as the CLICKBase Refined plate.

The FreeCAD file with the added pocket is included, as are STEP and STL files.
The original non-stackable stand has a 79,5 mm diameter. I'm including a plate with 80mm pocket. If any base doesn't fit your print, you can adjust the size by going back to the FreeCAD file, opening the Sketch for the Pocket and adjusting the constraint from 70 mm to anything you need. As such you could technically call this "parametric".

The bottle cap holder seen in the photo, if anyone is curious.

Note: Initial upload had the wrong diameter for the original stand version (78 instead of 80). I've meanwhile printed both original stand and the base for it and verified they fit. Fit is slightly less tight than the other one, if you want it more snug, pull it in by 0,1-0,2mm.