Kiếm Warrior Gear Saber

This file is my take on a messer/saber for the Warrior Gear pool noodle weapons. I printed everything at 20% infill but you'll probably want to print the guard at a higher percent so it doesn't break when fighting with your friends. 

You'll need to get some 1/2 inch PVC or irrigation pipe that will fit down the middle of your handles and the pool noodle. Then of course you'll need a pool noodle lol. If you're impatient like me you'll try to screw the handles together as soon as the next piece comes off the printer. But a better way to do it is to slide the pieces onto your 1/2 inch PVC as that lines them up better for screwing together. 

I actually printed all the pieces and put them together before putting them on the PVC pipe that way i could cut the pipe to what I felt was a good length instead of measuring things... 

If you want to have a "CURVED SWORD" (Skyrim TM) you can very carefully heat the PVC pipe and bend it. You SHOULD use a heat gun to accomplish this!!!! Personally I used my gas stove... DO NOT BE LIKE ME! Please be safer.... 

Anyway, I like forward to seeing you guys make your own!