Giá đỡ ngắn và dài cho máy khắc laser Elegoo Phecda

The honeycomb grid for the Elegoo Phecda laser engraver is an awkward thickness for the stock risers. With one set of risers the machine sits too low and with two it is too high for material up to around 6mm (¼").

These risers are a shorter than stock set that will thread into the existing ones. They are a two part design with the main riser meant to be printed out of pla/petg and the foot is intended to be printed with a soft TPU (I used 82a TPE for mine)

I made these with 1/8" and ¼" material in mind. I haven't tested what the ideal min/max range of thickness is.

ADDED: There is now a set of risers that is roughly 1.5x the length of the stock ones to work better with the rotary.