Hệ thống giá đỡ Sim Button Box

New mounting system for sim racing boxes based on the great parts designed by RostaP.

You will need a selection of M3 screws and nuts. Clamp bolt is a M6x55

Clamp has holes for your hex driver to bolt the mount to the clamp as can be seen in one of the pictures.

The other mounts can be used for your rig for direct mounting instead of a clamp.

if using the  extension arm you will need to print 2 of the screw-hand small and nut-small

If found that after a while the hand screw may be too tight to release , you can use an M8 allen wrench