Đế gắn tựa tay Secretlab Titan CloudSwap cho bộ Logitech X56

I had an old HOTAS setup that screwed onto the armrest to hold itself on.
Since I just bought a very expensive gaming chair (as opposed to the $50 one I had before) I didn't want to damage the armrests.

Since the Secretlab Titan has the cloud swap technology, I searched around the internet for an armrest model that I could print. The scale was a little small so I had to do about 4-5 test prints to get it to just about the right size.

All I did was take the armrest model I found and added a baseplate that fits the Logitech X56 on it using 4 screws and nuts (per armrest). The model can be mirrored to print left or right.

Print Settings:
I didn't want to change them breaking..

infill: 20% honeycomb
wall loops: 3
top and bottom layers: 5

Links to screws and nuts used:

https://www.amazon.com/dp/B0DFYN6WT8

https://www.amazon.com/dp/B0BCR8G4K7