Sequential Cube Puzzle - Khối Xếp Hình Mê Cung Tuần Tự

A six piece puzzle with removable maze plates.  The puzzle can be assembled in one step with maze plates removed.  Maze plates are then added and secured with a screw.

A good first maze is the Sequential Star Maze (included). This turns the puzzle into a Sequential Star, which takes 16 moves to solve. Alternative mazes can be printed to change the puzzle. You can even devise your own mazes.

Required hardware:
6 Stainless Steel Dowel Pins, 1/16" diameter, 3/8" long (or 1.5 mm, 10 mm long)
https://www.mcmaster.com/90145A417/ (or https://www.mcmaster.com/91595A009/)

6 M3 Screws, M3 x 0.5 mm Thread, 10 mm Long
https://www.mcmaster.com/91292A113/

The puzzle is made quite large (it fits in a 3.5" or 9 cm cube) so that there is plenty of room on the mazes.  After printing a copy of the puzzle, printing the six mazes to change the puzzle goes quickly.

To make this puzzle, download the build instructions. Also included is a guide which tells you how the puzzle works.  Eventually, I will add the OpenSCAD program so you can generate your own mazes.