Giá đỡ MiLi tracker tag / MiTag cho yên xe đạp

I designed this model taking inspiration on other existing mounts for AirTags. Having an Android, I found those tags using similar technology but for other phone vendors as well.

Those MiLi tags, or MiTag are slightly larger than AirTags with a 39mm diameter. I also found that other mounts didn't allow the use of a saddle mounted rear bike light.

This design makes the tag less visible and more protected. As shown in the pictures, it can be installed with an existing saddle mounted rear light.
The tag is held with friction fit but is very tight to avoid it moving while allowing easy change.
You don't need any screws, the mount can be clipped on the saddle bars with a tight fit so it's safe.

Can be printed without supports. I fast printed it using PETG, 50% infill or additional perimeters as you prefer for better strength. The friction fit is really good as is and feels really secure.

A few links for the tags in case one goes down:
- https://mili-shop.com/products/mitag-duo
- https://www.amazon.ca/MiLi-Bluetooth-Official-Authorized-Compatible/dp/B0DP7LCN67
- https://www.amazon.com/MiLi-Bluetooth-Official-Authorized-Compatible/dp/B0DP7LCN67