
Case Faketec V4 Meshtastic MeshPhone có GPS và OLED
- Downloads
- 238
- Likes
- 42
- Views
- 1,917
- Remixes
- 2
- Comments
- 0
Files 12 115.7 MB
- MeshPhone_M3_Fat_1778884297.stepSTEP · 1.2 MB
- MeshPhone_M2_Fat_1778884299.stepSTEP · 1.2 MB
- MeshPhone_M2_Slim_1778884301.stepSTEP · 1.2 MB
- Back_18650_M3_1778884301.stlSTL · 4.9 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Vỏ case Faketec V4 cho Meshtastic kèm GPS, Joystick 5 hướng và OLED 1.5"Bybjk8kds_2502967 · 07/15/2026
Nút nhấn tùy chỉnh cho case RoTec V5.4 - Giải pháp khắc phục hiệu quảByVexorter_1218088 · 05/16/2026
Details
- Model ID
- #386534
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
Updates
-
Added a new front part version that fits the (NEW) 0.96" OLED, since the old version was designed for the original OLED size.
Thank you @JLO_2137313 for the feedback! -
Added a version that fits 18650 batteries. It’s a bit thicker, but it’s nicer with the larger battery.
Thank you @JLO_2137313 for the suggestion! -
Added an M3 version for the 18650 case.
-
Added Step files.
Description
This is my first self-designed case for the Faketec V4.
I’ve tried many of the other cases available here and liked features from several of them. Unfortunately, there wasn’t a single design that included all the features I wanted. Therefore, I combined the aspects I liked from multiple designs and created my own version.
This case is small and compact, resembling the shape of an old MP4 player or a phone.
It includes dedicated spaces for the ATGM336H GPS module and a buzzer such as the SMD8530.
The case also supports both the old and new sizes of the SSD1306 0.96" OLED display, with the older version being slightly larger.
I also included a physical power switch, since I don’t fully trust the software-based power-off feature.
Aside from the added modules on top, the rest follows the standard Bill of Materials (BOM) for the Faketec V4 board.
The battery I used is a standard 103450 LiPo cell.
For assembly, I used M2 screws to keep the design as compact as possible and to hold all components securely. The case supports antennas with the maximum base diamater of around 13mm. The model also includes holes for a lanyard.
Components Used
OLED Display (NEW oled):
https://www.aliexpress.com/item/1005006901360788.html
GPS Module:
https://www.aliexpress.com/item/1005008476063712.html
Buzzer:
https://www.aliexpress.com/item/1005007896257871.html
M2 Screw Kit:
You can get by with just 9 × M2×4 and 3 × M2×5, or any similar M2 screws.
https://www.aliexpress.com/item/1005007278965396.html
Heat Inserts (optional):
M2 × 3 mm long, OD 3 mm
https://www.aliexpress.com/item/1005008666672949.html
Antenna Connector (10 cm):
https://www.aliexpress.com/item/1005009812335103.html
Power Switch (standard 6 mm slide):
https://www.aliexpress.com/item/32812689209.html
Battery (103450 LiPo):
https://www.aliexpress.com/item/1005007520210283.html
Print spec
- Formats
- stepstl
- Model files
- 12
- Total size
- 115.7 MB
- Largest file
- 17.9 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-
New -

-


