
Móc Treo Siêu Chịu Lực Cho Kệ Garage
Remix of Móc treo tường chịu lực cho đồ vật By pkkshadow
- Downloads
- 12
- Likes
- 5
- Views
- 81
- Remixes
- 0
- Comments
- 0
Files 4 4.2 MB
- 3-Gap_-_Hook_1778884041.stepSTEP · 200.7 KB
- 3-Gap_-_Hook_1778884042.stlSTL · 1.6 MB
- 3-Gap_-_Hook_1778884043.3mf3MF · 1.4 MB
- 3-Gap_-_Hook_0.4n_0.2mm_ASA_XLIS_55m_1778884044.bgcodeBGCODE · 1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #386490
- Category
- Đồ Gia Dụng
- Published
Description
I use a lot of 'hammerlock' style shelving in my garage. It's the sort that is assembled using a hammer to attach shelving rails to pre-punched uprights. They are a common product in Bunnings (an Australian hardware chain).
I had been using bits of bent fencing wire as hooks to hang things like coats and power cords from the uprights. Not most elegant of solutions ;-)
I saw @pkshadow_134415 's Heavy Duty Wall Hook - and quite liked the look of it. I used their design as inspiration for my own design of the hook. I didn't use any measurements from the original - but our designs ended up looking look very similar indeed.
I sized my hook so that not only can it be screwed to a wall (like the original), it can also be bolted to the uprights of the garage shelving using a couple of M6 x 16mm bolts and nuts. The spacing of the bolt holes was the critical factor.
Printing:
Depending on how strong you want the hook to be you can vary the various print settings. My first one (pictured) was printed in ASA with 4 perimeters and 20% cubic infill. It feels quite sturdy indeed.
Print spec
- Formats
- 3mfbgcodestepstl
- Model files
- 4
- Total size
- 4.2 MB
- Largest file
- 1.6 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-
New -

-

-

-
New

