Kẹp gắn trần cho LED panel khung 10mm (MultiClip)

This is a holder clip to mount the 62x62cm LED panel by the German manufacturer Proventa or any other LED panel with 10mm frames to your ceiling.

You will need at least four of these clips for a panel, along with one MultiClip per holder to fix the holders in the way you want to. You can find the MultiClip in my public designs (with extensive explanation).

I recommend to switch on the panel in advance, find out which sides are getting warm during operation of the panel and using the clips on the sides that stay cold because temperature might affect PLA stability if you use the clamps otherwise. Mount two of the holders on one side, then put in the panel and slide the other two holders onto their multiclips.
See the picture for an impression of the mounted result.

If you like the MultiClip idea you might want to have a look at some more MultiClip-enabled designs. You are also very welcome to use the MultiClip Templates for your own objects.