Lucy Pyre NSFW

Project: Lucy Pyre.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 181.82x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

(Other filaments should work but can give sligtly different results)

PLA BambuLab Matte Charcoal (Black) Transmission Distance: 0.6

PLA BambuLab Matte Ash Gray (Gray) Transmission Distance: 1.5

PLA BambuLab Matte Ivory White (White) Transmission Distance: 3.5

This print uses 3 unique filaments

Swap Instructions:

Start with Charcoal (Black)

At layer #17 (1.44mm) swap to Ash Gray (Gray)

At layer #22 (1.84mm) swap to Ivory White for the rest. (White)