Mandalorian HueForge

My first published hueforge Print. Thought it looks pretty cool, so I wanted to share.

I used black, white, military beige and anthracite from Extrudr Pla NX2, but it will also look cool in different color combinations.

Here are the setting for the Printer given by HueForge. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 200x112.5mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm. The Max allowed Thickness is 2mm and the Actual Thickness is 1.99533mm

#eeeee7 PLA Extrudr CMYK lithoweiß Transmission Distance: 6

#d0b084 PLA Extrudr NX2 militarybeige Transmission Distance: 2

#3a4145 PLA Extrudr NX2 anthracite Transmission Distance: 0.5

#1c1c1c PLA PolyTerra Charcoal Black Transmission Distance: 0.3

This print uses 4 unique filaments

Swap Instructions:

Start with CMYK lithoweiß

At layer #10 (0.88mm) swap to NX2 militarybeige

At layer #17 (1.44mm) swap to NX2 anthracite

At layer #23 (1.92mm) swap to Charcoal Black for the rest.

Enjoy