Skip to main content
F3D
Đế gắn thiết bị đo nhiệt độ & độ ẩm cho Prusa Core One 1

5 images

Máy In 3D

Đế gắn thiết bị đo nhiệt độ & độ ẩm cho Prusa Core One

Remix of Đế Đựng Ống Đo Nhiệt Độ / Độ Ẩm LCD By Extrutim

By _4670392

Downloads
18
Likes
11
Views
194

Files 2 1.1 MB

  • core-one-temp-humidity-monitor_1778653347.stlSTL · 76.8 KB
  • Thermostat-stands-03mod_0.4n_0.2mm_PETG_COREONE_1h0m_1778653348.bgcodeBGCODE · 1.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Core One/+ Temp and humidity gauge stand.

Most Ive seen for the core one are sitting where you need light or get real close to read it so using two models I made a solution that is easy to view. The Thermometer / Hygrometer Stand by Extrutim as the base and the Hygrometer house for Prusa Core One by Raymond as the frame, I added 3, 3x12 N52 Magnets. The monitor now sits at the base of the core one and catches the core one light. I can now see the numbers at a glance.

The meter I used was on Amazon. Be cautious because they all show about the same dimensions but they aren't. https://a.co/d/0aWDqReW

I used organic supports and prusament petg. Use whatever supports that work the best for you. 

The magnets fit tight but you might have to use a dab of glue if you use strong magnets. 3 magnets is really overkill because it sits on the base and only needs to stay in place due to the machine vibration.

Read more Show less

Print spec

Formats
bgcodestl
Model files
2
Total size
1.1 MB
Largest file
1.1 MB

0 comments

See all