Ngàm kẹp mềm TPU cho ê-tô 6 inch

This is a few versions of soft jaws for a 6" vice. Mine is harbor freight, but I've tried it on several friends 6" vices of other brands and it still fits well. If it doesnt, simply scale the dimensions in X and Y to fit in the slicer.

There are spots for 5mm x 1.5mm magnets, but they are not necessary, the soft jaws grip and stay put nicely.

I like to use Overture High Speed TPU which is a little harder than many other TPU's, but others will work just as well, and maybe a softer one will suit your needs better.

Slicing instructions:

Use gyroid infill at 10% and perimeters to 2. If you want it stiffer use 3 perimeters and 30% infill.

I used fuzzy skin on the contact faces, but thats not mandatory if it doesnt serve your purpose.

I had a set on for 3 years before I gave it to a friend, and when I printed another set I decided to make additional versions and upload it here.