Skip to main content
F3D
Móc Treo Cuộn Vinyl - Ball Bearing 1

3 images

DIY

Móc Treo Cuộn Vinyl - Ball Bearing

By allardjd_296237

Views
45

Files 1 396.2 KB

  • Vinyl_Roll_Hanger_rev_5_1778359825.stlSTL · 396.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#381386
Category
DIY
Published

Description

Vinyl Roll Hanger - Ball Bearing

Ball bearing hanger for HTVRONT vinyl roll holder - fits on 3/8" Closet Maid rail.

The vinyl roll holder referenced is similar to...

https://www.amazon.com/HTVRONT-Storage-Compartments-Organizer-Hanging/dp/B097XXMGGK/ref=sr_1_

When loaded these holders are pretty heavy. Hanging them in a closet is a convenient and compact way to store a large inventory of adhesive or heat-transfer vinyl on rolls but it's difficult to move them along the rail. This hanger is made to fit the 3/8" steel hanger rod of Closet Maid systems and incorporates a 623 (10 mm X 3 mm X 4 mm) ball bearing, making moving the hanger along the rail easy. The centerline of the bearing is over the center of the hanger pins so the hanger remains level, even when heavily loaded.

This is an easy print with no supports but it needs to be pretty dense to hold the weight. After printing, poke a 3 mm drill into the dowel pin hole to assure correct sizing. Install the bearing and the dowel pin and it's ready to go.

PLA works for this despite the weight. I had an earlier version (without the ball bearing) hanging for months with no strength issues. The only problem with that version was the difficulty of moving the hanger along the closet rod.

Printing Notes:

Material: PLA

Wall loops: 5

Wall thickness: 1.2 mm

Layer height: 0.15 mm

Infill: 50%

Supports: no

Bill of Materials:

- Hanger (3D Printed)

- M3 X 25 mm stainless steel dowel pin (qty. 1)

https://www.amazon.com/dp/B0B6FMD9Z1?th=1

- 623ZZ ball bearing (qty. 1)

https://www.amazon.com/dp/B0DHVC98X1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
396.2 KB
Largest file
396.2 KB

0 comments

See all