Skip to main content
F3D
Bộ phận thay thế cho ví FANTOM chính hãng 1

7 images

Trang Phục - Phụ Kiện

Bộ phận thay thế cho ví FANTOM chính hãng

By IJsklontje_1181677

Downloads
75
Likes
16
Views
832
Comments
2

Files 12 1.4 MB

  • Wallet_-_Back-1_1766215744.STLSTL · 86.7 KB
  • Wallet_-_Hinge-1_1766215745.STLSTL · 50.5 KB
  • Front_1766215746.DXFDXF · 26.8 KB
  • Back_1766215747.DXFDXF · 25.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

My original wallet broke and therefore modelled the parts to make replacements.

I cross fitted printed components with the real wallet, and everything seemed to fit or be accurate enough to function properly. The geometry is slightly changed to the original in order to make the parts suitable for printing.
You can use these files for replacements parts or give it a new look.

The wallet will be a bit flimsy if you print the plates in plastic. I recommend to cut them out of another material you can do this with the included DXF's of the front and back plates so you can laser cut these parts.

For assembly you will need countersunk M2 hex screws, I got mine cheaply from China.
I recommend drilling out the holes with a 1.5mm drill bit.

Post your makes, would love to see them!

NOTE: The design is optimized to be printed with a 0.4mm nozzle. This is in order to fit the plates properly and to assure proper alignment. Recommended layer height of 0.1 or 0.2
mm because the model consists of feature which are multiples of 0.2.

If the cards are a bit loose you can put a bit of foam or a rubbery tape on the bendy lever arm of the main frame. This will make sure the cards will fit more snuggly. This is also how the original FANTOM dit it.

For assembly you will need Countersunk M2 hex screws, I got mine here: https://nl.aliexpress.com/item/4000020967604.html?spm=a2g0o.productlist.main.13.1c113c82xPG0dL&algo_pvid=1dc95466-9cd4-4de9-8679-e105ca8699df&algo_exp_id=1dc95466-9cd4-4de9-8679-e105ca8699df-6&pdp_npi=4%40dis%21EUR%211.78%211.64%21%21%211.84%21%21%4021038edc16959907097518159eb1f6%2110000000048642024%21sea%21NL%21789551162%21&curPageLogUid=07mYRT9ln4Ng

For smooth operating you can consider purchasing M2 standoffs:
https://nl.aliexpress.com/item/4000152799825.html?spm=a2g0o.productlist.main.35.1f674333IMA86o&algo_pvid=c54e02c3-fda0-426c-bfc8-64b54735631d&algo_exp_id=c54e02c3-fda0-426c-bfc8-64b54735631d-17&pdp_npi=4%40dis%21EUR%215.29%214.17%21%21%215.46%21%21%4021038edc16959905117105922eb1f6%2112000028208790521%21sea%21NL%21789551162%21&curPageLogUid=I2dSdI5bInyz

Read more Show less

Print spec

Formats
3mfdxfstl
Model files
12
Total size
1.4 MB
Largest file
432.9 KB

2 comments

See all