
Bình hoa ma Booh cho trang trí Halloween
Remix of Mô Hình 3D "Ghost Booh" - Dễ Thương và Độc Đáo By BODY3D
- Downloads
- 1,035
- Likes
- 149
- Views
- 3,236
- Remixes
- 1
- Comments
- 27
Files 4 22.7 MB
- Eye_right_1766295054.stlSTL · 212 KB
- Eye_left_1766295054.stlSTL · 160.1 KB
- Ghost_vase_1766295055.stlSTL · 11.1 MB
- Ghost_vase_single_1766295057.stlSTL · 11.2 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #37866
- Category
- Sự Kiện - Lễ Hội
- Published
- License
- Creative Commons — Attribution
Description
t chI remixed the cute Ghost Booh from BODY3D to be printed in vase mode.
With this printing method you have a nice finish and a fast print. It took on my stock CR-10 V2 only little more than 2 hours and 23g of filament.
You have a model to be printed in one color (…_single) and one for eye inlets which can be printed in different color.
At vase mode prints i recommend to use a bigger line width. With a 0.4 nozzle you can print up to 0.8mm line width, you only have to increase the temperature a bit and maybe reduce the Speed. It is important to focus on the top view in your slicer that You have no open gaps.
I printed it with 0.08 layer height and Sunlu white PETG, because it is more like a bit transparent because of less color particles and looks maybe better when illuminated. The eye inlets are Orange Prusament PETG and printed at 95% that there is a gap for some glue.
You can drill a hole at the top to hang it in the air with some fiber string for the best look like i did 😉 Additionally I illuminated it with UV-light on the amazing flying pictures!
In Cura it tells me that the models are not watertight, but i could not see any problem and also repairing the model did not changed anything, but it printed find… 😉
Would be happy to see your makes!
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 22.7 MB
- Largest file
- 11.2 MB













