Tag MOLLE 2 Chiều - Sói (Wolf)

I loved the 2-way MOLLE model I found here and I personalized it. In my file is the MOLLE tag and a filler for the cutout. I printed a set in black and a set in GITD green and swapped inserts. If your printer tolerances are good, the inserts will press fit in, with no need for glue or anything.

NOTE: The insert should be pressed in flat with the “back” of the tag. The insert is slightly shallower in depth in the front of the tag for asthetics. Gives a little impression of embossing. 

Printed in 0.2 layers, 0.4 nozzle, no supports, 10% infill.