Skip to main content
F3D
Module lưu trữ Gridfinity cho Pi Pico (2W 1D 3H) 1

1 image

DIY

Module lưu trữ Gridfinity cho Pi Pico (2W 1D 3H)

By Halflink_688784

Downloads
2
Views
30

Files 1 109.8 KB

  • pico_holder_v5_1778206870.stlSTL · 109.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

# Gridfinity Pi Pico Storage Module (2W 1D 3H)

Stackable Raspberry Pi Pico Storage Solution for Gridfinity Systems

This 2W x 1D x 3H Gridfinity-compatible module is designed to neatly store up to 6 Raspberry Pi Pico boards (or similar-sized microcontrollers) in a compact, modular, and stackable format. Perfect for organizing your workspace, toolbox, or electronics bench.

---

### Features

- Dimensions: 2 Gridfinity units wide, 1 unit deep, 3 units high (compatible with standard Gridfinity bases).

- Capacity: Holds 6x Raspberry Pi Pico boards (or clones) securely in place.

- Stackable: Designed to stack vertically or horizontally with other Gridfinity modules.

- Modular: Works seamlessly with existing Gridfinity ecosystems (e.g., 3D-printed bases).

- Open Design: Easy access to boards without removing the entire module.

- Customizable: STL files included for adjustments (e.g., adding labels, vents, or cable management).

---

### Compatibility

✅ Raspberry Pi Pico (original & W)

✅ Raspberry Pi Pico 2

✅ Most Pico-compatible clones (e.g., Pico W)

✅ Other similarly sized dev boards (check dimensions: ~51mm x 21mm)

---

### Printing Recommendations

- Material: PLA, PETG, or ABS (0.2mm layer height recommended).

- Infill: 20-30% for durability.

- Supports: Not required for most orientations.

- Tolerances: Designed for a snug fit; adjust if your printer runs tight/loose.

---

### Assembly

1. Print the module (no supports needed if oriented correctly).

2. Snap into a Gridfinity base (e.g., 4x4, 6x6, or custom).

3. Stack additional modules as needed.

---

### Why This Design?

- Space-Efficient: Maximizes vertical space in your Gridfinity setup.

- Protection: Shields boards from dust and minor impacts.

---

### Files Included

- STL for the main module

Designed for makers, by makers. Happy printing!

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
109.8 KB
Largest file
109.8 KB

0 comments

See all