Hộp Đựng Túi Cho Flexi Leash - CÓ REWINDER!

After scrolling and scrolling to find a good sh*tbag dispenser, I decided to take matters into my own hands.

Behold, my version of the FlexiLeash sh*tbag dispenser WITH REWINDER!!! (yaaay!).

Is it overengineered? Most likely. Was there an easier way to make a rewinder? Probably.
But does it work? YES, IT DOES!

So, about the model:

1. I’ve made the lid Print-in-Place with a 0.3 mm gap, so it should be fairly easy to print on any printer.

2. The roll adapter is made to fit snugly into rolls with an inner diameter of 8 mm, since that’s what I have. (Feel free to ask in the comments or send me a DM if you need another size. Or use the STEP file provided)

3. The rewind handle can be glued—or not. For me, it fits nicely without glue.

4. This is my first CAD/STL with multiple parts and Print-in-Place EVER. So if you have any suggestions or ideas for improvements, please let me know so I can keep improving :)

   Tips to fit the bags: Dont push the adapter all the way in, screw the lid once its engaged with the adapter. It will ensure that the roll has no play and wont get "out of gear". Not sure if that's clear, english is not my native language :')

V2 updates: Made the lid a bit nicer and a longer roll adapter.

V3 updates: Holes everywhere. less plastic and will allow you to add keyrings or whatever you want.

Print profile:

For my K1C I used: PLA, 0.2 mm layers / 2 walls / tree supports (auto, slim), threshold 10° / no brim

Thank you for downloading! Please leave a comment and a picture, that's the best you can do for me :) !