
Cảm biến filament thông minh: runout switch + nút RGB backlit
Remix of ERCF Smart Filament Motion Sensor By Turge_265572
- Downloads
- 2
- Likes
- 1
- Views
- 63
- Remixes
- 0
- Comments
- 0
Files 6 2.5 MB
- Smart_Filament_Motion_Sensor_with_Switch_and_RGB_Button_1778187824.stepSTEP · 1.8 MB
- Base_1778187825.stlSTL · 299.1 KB
- Top_1778187826.stlSTL · 339.6 KB
- cover_1778187826.stlSTL · 28.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #376844
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
I found the original model to be a really good sensor but I wanted more quality of life features.
Bill Of Materials
There are so many different versions of these, with different mounting hole positions and sensor heights. Make sure it looks like the mounting hole is in the centre
6 pin pair for standalone or 7 pin for multi toolhead setups. Other pin counts as needed to connect to MCU
Micro Tactile Switch 6 x 6 x 5mm
RGB LED from Stealthburner. Untested option
Wire 30AWG for RGB, button and switch. Up to 22AWG for connecting to MCU
5mm steel ball
CYT1073 micro limit switch
Shim M3 0.2mm
To adjust sensor height
M2 × 5 or 6mm FHCS for cover
M2 SHCS any length from 12 to 16mm will work for switch
plus hardware as required by original model except the sensor, I'm using a different version
If setting up multiple I recommend a RP2040-Zero flashed with Klipper
Printing
Printer should be well calibrated. These are the settings I used.
0.2mm layer height
4 walls
40% Infill
5 solid top and bottom layers
No supports needed. Orientate as shown
Assembly
Refer to photos, CAD, original project and your own intuition.
Connecting to Printer and Software Setup
Setup as you would the BTT SFS V2.0
Add a gcode button and neopixel and configure some macros
Print spec
- Formats
- stepstl
- Model files
- 6
- Total size
- 2.5 MB
- Largest file
- 1.8 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -

-

-

-

-


