DIY Art | Chambre 001

The Open Chambre series is a collection of 3D-printable sculptures released as open-source art by Tokyo-based artist V-XL (Baptiste Tavernier).

Explore the Full Archive! 
More projects are available on the official terminal: https://v-xl.art

• Artist: V-XL

• Format: 49 x 41 x 6 cm ; Optimized for FDM 3D printing.

• Printer: Parts were kept small on purpose, so they should fit on a Mini if you don't have a regular size printer.

***********************

🛠 PRINTING PROTOCOLS

• Aesthetics: Optimized for any material. Standard Color Scheme: black frame with high-vis blue and red accents; white specimen

• Hardware: All V-XL modules utilize M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) for fastening.

• Specs: 0.4mm nozzle recommended. Use a brim to ensure structural integrity and prevent warping when printing the base.

This module is divided into several files.

—First, print the 4 "Base" files (Standard Color Scheme: black). They do not need supports, but a brim can help stabilize the base onto the printer’s plate.

— Fasten the Base modules with M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm)

— Then print the Diamond (x4) and all the Inlay files (S.C.S.: blue or red). You will need to print Diamond inlay 4 times ; glue all the inlays into the Base

— Then print all the "specimen“ in files (S.C.S.: white). You should not need supports normally.

— Glue the specimen to the base

————— © V-XL // Baptiste Tavernier