
RepRack phiên bản 20mm và 20.5mm
Remix of RepRack: Giá đỡ cuộn dây và hệ thống lưu trữ mã nguồn mở By Repkord
- Downloads
- 721
- Likes
- 126
- Views
- 3,706
- Remixes
- 0
- Comments
- 0
Files 8 3.4 MB
- RodClamp_closed_20.5mm_1778176765.stlSTL · 279.4 KB
- RodClamp_open_20.5mm_1778176766.stlSTL · 241.1 KB
- test-hole_20.5mm_1778176766.3mf3MF · 19.6 KB
- RepRackHanger_20.5mm_1778176767.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #376247
- Category
- DIY
- Published
Description
In Germany its very hard to find 19mm outer diameter pipe. So I decided to make a 20mm version. The holes are 20,5mm diameter. First try with 20mm holes was too tight and difficult to assemble.
I recommend to print first the test part to ensure that the diameter has the desired size.
To clamp the tubes into the holders, 3.5x16mm "self-tapping" screws are suitable
For the side-mounted clamps, these are unfortunately not suitable because the holes in the holder are too large.
Thanks to @Repkord for the awesome design.
Happy printing!
20.10.22
-
Added picture with screws.
-
Added screw recommendation.
11.04.26
- Added 20mm version.
Print spec
- Formats
- 3mfstl
- Model files
- 8
- Total size
- 3.4 MB
- Largest file
- 1.2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-


