Fidget Băng Chuyền | Con Lăn Cầm Tay Siêu Đã

About

This handheld chain conveyor belt fidget uses a satisfying snap together design, with no external hardware needed! It also requires no support, and can be fully printed on single material machines like my own.

Print Settings

• 0.4mm nozzle is fine

• Though mine are PLA, I reccomend PETG as it is less prone to snapping the belt connections during assembly, as PETG is much more flexible

• Any layer height will do, but for the outer casing I reccomend smaller layers to make it feel smoother

Assembly Instructions

PLA CONNECTIONS

snap them together from the top to mitigate the joint breaking open

PETG CONNECTIONS

snap them together from the side, the "easy segment" pieces have a slightly easier fit this way but may come apart more easily as well.

---

Make A Loop

Large - 19 segments  |  Small - 16 Segments

Insert the Insert 

If you are making the Two Side version, add the cap to this and you are done!

Slide in the Insert

Add two 1.75mm Filament Pins (standard size)

You're Done!

Thanks so much!