
Bảng Hextraction cho bàn in nhỏ (148x153)
- Downloads
- 802
- Likes
- 67
- Views
- 2,315
- Remixes
- 1
- Comments
- 0
Files 6 6.4 MB
- Baseplate_Small_A_v1_1778142643.3mf3MF · 65.1 KB
- Baseplate_Small_B_v1_1778142645.3mf3MF · 40.1 KB
- Clip_1778142646.3mf3MF · 75.4 KB
- Clip_0.4n_0.2mm_PETG_MINI_17m_1778142647.gcodeGCODE · 499.2 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #375460
- Category
- Đồ Chơi Khác
- Published
- License
- Creative Commons — Attribution
Description
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included here.
I wanted to print Hextraction, but I found that the included board sections were much too large for my Prusa Mini+'s print bed. Since Zack made the original Fusion 360 files available, I was able to create 7 segment and 4 segment sections that fit together to create the original board. To ensure strength between the parts, I also created tweaked clips with “tabs” on both sides to fasten pieces on a side (as opposed to the original clips, which are designed for only top/bottom fastening).
Check out the images to see how things fit together and what I believe are the optimal clip locations. I placed the custom clips between the binder clips and the original clips on the 5 horizontal borders between the top and bottom sections.
Make sure your board notches are aligned before you glue!
Finally, check out Hextraction at https://www.playhextraction.com!
Print spec
- Formats
- 3mfgcode
- Model files
- 6
- Total size
- 6.4 MB
- Largest file
- 3.7 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-

-
New -



