Skip to main content
F3D
Bộ chuyển đổi thoát khí PC ra cửa sổ (Gắn phía case) 1

3 images

Dụng Cụ Tiện Ích

Bộ chuyển đổi thoát khí PC ra cửa sổ (Gắn phía case)

By RustyShackle_4140300

Likes
1
Views
51

Files 3 333 KB

  • 140mm_fan_to_125mm_PC_to_duct_adapter-Full_1778109799.fcstdFCSTD · 134.9 KB
  • PC_140mm_attachmentpoint_1778109800.3mf3MF · 48 KB
  • 140mm_to_125_Hose_adapter_1778109801.3mf3MF · 150 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Disclaimer, this is one of my first prints, so any constructive critisicm is welcome.

ENSURE your case allows for screw-holes beyond the 140 mm. Measure this before printing.

Requires the following: 

8 x 0,5mm ⌀ magnets

4 x casefan screws

~3mm thick self-adhesive rubber tape.

When printed, insert the magnets in the holes with a drop of strong glue and be sure all the poles are similar. on the back side (the side against the case) cut out the 3mm rubber adhesive and put it on the entire edge of the retangular shape. 

Screwing in requires you to screw from the inside of the case, into the adapter on the outside of the case. 

The from the 140 to 125 duct adapter, simply add in the magnets with a drop of glue and on the duct side the hose of your choosing (125mm ⌀!) . 

Now you can slide the adapter on and off the PC case.

Read more Show less

Print spec

Formats
3mffcstd
Model files
3
Total size
333 KB
Largest file
150 KB

0 comments

See all