(Parametric) Nắp che ống / Mặt bích / Rosette / Ốp trang trí

Intro

I'll cut right to the chase: here's a parametric Pipe Mask that should fit almost all pipes amd cover any contractor caveman that can't seem to make a simple hole in a wall (tile) to fit the plumbing pipes.

Made in (Autodesk) Fusion (360) and conjured up this thing with 3 simple usable parameters.

Parameter list

Name

Unit

Expression

Comments

Internal_Diameter

mm

35 mm

Pipe Diameter

Flange_thickness

mm

20 mm

How thick/wide it should be.

It should not be less than a 5th of the Internal Diameter!!!

Height

mm

5 mm

Same as name :)

Parts List

A single print. No assembly required.

Files:

File Name

Comment

Flange.f3d

Fusion 360 file with customizable Parameters

Flange.35.20.5.stl

STL with the standard parameters (see above)

NOTE: in case additional sizes are needed and you don't have Fusion, I'll be happy to upload an STL with other dimensions.

Filaments:

• PLA, PETG

• anything that is plant-friendly and can hold water.

Printed Parts:

Special Print Instructions:

• 0.2mm Layer Height

• Minimum 2 perimeters 

Non-Printed Parts:

•  N/A